Does the 58UH6300 work with RemotApp?
Yes. The 58UH6300 runs webOS 3.0, and RemotApp controls it over Wi-Fi with no setup beyond accepting the connection on the TV once.
- ✓Remote over Wi-Fi Yes
- ✓Infrared (Android with IR) Yes
- ✓Send photos and videos Yes
- ✓Turn on from the phone Yes
Protocol: LG webOS (SSAP 3000/3001)
What the code 58UH6300 means
TV model codes follow the maker’s naming rules. Reading it piece by piece:
58Screen size in inchesUH6300Series (2016 line) · UHD
58UH6300 specifications
Display
| Display diagonal | 147.3 cm (58") |
|---|
| HD type | 4K Ultra HD |
|---|
| Screen shape | Flat |
|---|
| Native aspect ratio | 16:9 |
|---|
| Screen format adjustments | 16:9 |
|---|
| Supported video modes | 2160p |
|---|
| Supported graphics resolutions | 3840 x 2160 |
|---|
| Motion interpolation technology | TruMotion 120 Hz |
|---|
| Native refresh rate | 60 Hz |
|---|
| Display resolution | 3840 x 2160 pixels |
|---|
TV tuner
| Tuner type | Analog & digital |
|---|
| Analog signal format system | NTSC |
|---|
Smart TV
| Smart TV | Yes |
|---|
| Internet TV | Yes |
|---|
| Operating system installed | WebOS |
|---|
| Operating system version | 3.0 |
|---|
Audio
| Number of speakers | 2 |
|---|
| RMS rated power | 20 W |
|---|
| Audio decoders | DTS, Dolby Digital |
|---|
| Sound modes | Game, Movie, Music, News, Standard |
|---|
Network
| Wi-Fi | Yes |
|---|
| Wi-Fi standards | Wi-Fi 5 (802.11ac) |
|---|
| Ethernet LAN | Yes |
|---|
| Wi-Fi Direct | Yes |
|---|
Design
| Product colour | Black |
|---|
| VESA mounting | Yes |
|---|
| Panel mounting interface | 300 x 300 mm |
|---|
| On/off switch | Yes |
|---|
Performance
| Backlight dimming technology | Local Dimming |
|---|
| Processor cores | 4 |
|---|
| Smartphone/tablet remote support | Yes |
|---|
Ports & interfaces
| PC in (D-Sub) | No |
|---|
| DVI port | No |
|---|
| Ethernet LAN (RJ-45) ports | 1 |
|---|
| USB 2.0 ports quantity | 2 |
|---|
| Component video (YPbPr/YCbCr) in | 1 |
|---|
| Composite video in | 1 |
|---|
| Digital audio optical out | 1 |
|---|
| RS-232 ports | 1 |
|---|
| RF ports quantity | 1 |
|---|
| Common interface (CI) | No |
|---|
| Common interface Plus (CI+) | No |
|---|
| HDMI ports quantity | 3 |
|---|
| Consumer Electronics Control (CEC) | SimpLink |
|---|
| Intel® Wireless Display (Intel® WiDi) | Yes |
|---|
Management features
| On Screen Display (OSD) | Yes |
|---|
Power
| Power consumption (standby) | 0.5 W |
|---|
| Power consumption (max) | 180 W |
|---|
| AC input voltage | 100 - 240 V |
|---|
| AC input frequency | 50 - 60 Hz |
|---|
Technical details
| Audio codecs | AC3(Dolby Digital), EAC3, HE-AAC, AAC, MP2, MP3, PCM, DTS, RA, WMA |
|---|
Sustainability
| Sustainability certificates | ENERGY STAR |
|---|
Weight & dimensions
| Width (with stand) | 1298 mm |
|---|
| Depth (with stand) | 258 mm |
|---|
| Height (with stand) | 825 mm |
|---|
| Weight (with stand) | 22.8 kg |
|---|
| Width (without stand) | 1298 mm |
|---|
| Depth (without stand) | 54.2 mm |
|---|
| Height (without stand) | 770 mm |
|---|
| Weight (without stand) | 22.3 kg |
|---|
Other features
| 3D | No |
|---|
| Built-in speaker(s) | Yes |
|---|
| Annual energy consumption | 163 kWh |
|---|
Technical data: Open Icecat and the manufacturer. Check the official page before buying; specs can vary by batch and market.
How to control the 58UH6300 with your phone
- Connect your phone to the same Wi-Fi network as the TV. (Not the guest network.)
- Turn the TV on and install RemotApp on your phone.
- Open RemotApp. It finds the TVs on your network by itself; tap your LG TV.
- The TV shows a connection request from RemotApp. Select “Accept”.
- Tap Volume + to test. That’s it: your phone is now the remote.
Full guide for LG TVs, with fixes when it won’t connect
Turning the 58UH6300 on without the remote
Turn on “Mobile TV On” (or “Turn on via Wi-Fi”), usually under Settings › General › Devices. The TV then accepts a wake-up signal from your phone while in standby.
Questions about the 58UH6300
Can I control the LG 58UH6300 with my phone?
Yes. The 58UH6300 runs webOS 3.0, and RemotApp controls it over Wi-Fi with no setup beyond accepting the connection on the TV once.
What year is the LG 58UH6300?
The 58UH6300 is part of LG’s 2016 line (UHD UH6300).
What operating system does the 58UH6300 use?
The 58UH6300 runs webOS 3.0.
How many HDMI ports does the 58UH6300 have?
The 58UH6300 has 3 HDMI ports.
Turning the 58UH6300 on without the remote
Turn on “Mobile TV On” (or “Turn on via Wi-Fi”), usually under Settings › General › Devices. The TV then accepts a wake-up signal from your phone while in standby.
